Hallo Liste,
Nachdem ich mit einem vorigen HP Drucker sehr schlechte (DRM) Erfahrungen
machen musste [0] wollte ich vorher hier nachfragen ob jemand einen Drucker
kennt/besitzt der:
- in Photoqualität drucken kann
- freie Treiber unter freien Betriebsystemen verfügbar sind
- kein DRM eingebaut hat und günstige Patronen von mehreren Herstellern
verfügbar sind
- neu bestellbar ist und nach Österreich geliefert wird
- optional auch Scannervorrichtung hat
Das es keinen Drucker gibt von dem die Firmware frei ist, haben wir iirc schon
mal diskutiert, aber das wäre natürlich das Optimum.
Vielen Dank für alle Hinweise und Erfahrungsberichte!
[0] http://www.markus-raab.org/About/Meinung/Computer/druckerpatronen.html
glg Markus Raab
Liebe Freundinnen und Freunde der Freien Software,
am Freitag den 20. Februar 2015 findet ein Fellowship-Treffen in Wien
statt. Wir treffen uns ab 18:00 Uhr im Metalab, Rathausstraße 6.
Die Agenda starten wir um 19:00 Uhr.
Folgende Punkte stehen dieses Mal auf der Tagesordnung:
* Diverses - Fellows/Gäste
* Gamecity-Finanzproblem: Heuer kein Infostand?
* freie.it-Infostand auf WU-Konferenz
* Bericht FOSDEM
* Pause
* Vorbereitung Linuxwochen 2015
* Diverses - Teammitglieder
* gemütliches Beisammensein
Wie immer richtet sich die Einladung an alle, die sich für die FSFE
oder für Freie Software interessieren. Wir freuen uns auf eine große
Teilnehmerzahl!
Viele Grüße,
--
Das österreichische Team der Free Software Foundation Europe
* Werde ein Fellow der FSFE und verteidige deine Freiheit! *
*** https://www.fsfe.org *** https://fellowship.fsfe.org ***
Hallo *,
ich suche alljährlich nach einem brauchbaren e-Book-Reader. Ist bisher
immer gescheitert. Im Rahmen der nun etwas konkreteren Ankündigung von
Canonical, ein Ubuntu-Phone via Hardwarepartner "bq" herauszubringen,
habe ich mir vorgenannten genauer angesehen.
Dabei sind mir einige positive Züge des Unternehmens aufgefallen.
Zum einen der *3D-Drucker*, dessen Hardware OpenSource sein soll.
=================================================================
http://www.bq.com/gb/products/witbox.html
"You can run Witbox printer with a variety of open source software such
as Slic3r™, Cura™, Pronterface™ and Repetier™. Enjoy greater freedom of
use, greater compatibility and total technological independence.
The hardware of bq Witbox is 100% open source, meaning you can modify it
and adapt it however you like. At bq we´re keen to share all our
improvements, without restricting knowledge."
=================================================================
Zum anderen der e-Book-Reader, dessen Firmware explizit unter der GPL
veröffentlicht wurde.
=================================================================
http://www.bq.com/gb/products/cervantes-2013.html
"If you’re an advanced user and you’ve installed the developers’ version
of the bq Cervantes’ firmware, you can modify the interface yourself.
We’ve published the source code for our software under a GPL*, and you
can find out all the details on this website.
*The published source code does not include any program or functionality
that requires an external, non-bq licence."
=================================================================
* Hat irgend jemand schon mal etwas von der Qualität des Unternehmes
mitbekommen, vielleicht gar z.B. ein Telefon in der Hand gehabt?
* Wie schätzt ihr den e-Reader (Firmware) und den 3D-Drucker (Hardware)
aus Freier Software/Harware Perspektive ein?
Bin gespannt.
LG,
Chris
-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA1
[ Dies ist eine automatisch generierte Nachricht an fellowship-austria(a)lists.fsfe.org. ]
Liebe Freundinnen und Freunde der Freien Software!
Am Freitag, den 20.02.2015 findet ein Fellowship-Treffen in Wien
statt. Wir treffen uns ab 18:00 Uhr in der Bibliothek im Metalab,
Rathausstraße 6. Die Agenda starten wir um 19:00 Uhr.
Die Tagesordnung für dieses Treffen wird rechtzeitig an dieser
Stelle bekannt gegeben bzw. unter
http://wiki.fsfe.org/FellowshipEvents/Vienna_2015-02-20
veröffentlicht. Sollte sich am oben genannten Termin noch etwas
ändern, erfolgt die diesbezügliche Information über die selben
Kanäle wie diese automatische Einladung.
Wie immer richtet sich die Einladung an alle, die sich für die
FSFE oder für Freie Software interessieren. Wir freuen uns auf
eine große Teilnehmerzahl!
Liebe Grüße,
- --
Das österreichische Team der Free Software Foundation Europe
* Werde ein Fellow der FSFE und verteidige deine Freiheit! *
*** https://www.fsfe.org *** https://fellowship.fsfe.org ***
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.12 (GNU/Linux)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=4tlH
-----END PGP SIGNATURE-----