Hallo,
das reguläre Fellowshiptreffen in Düsseldorf im Juli fand am 27.07.2016 statt. Wir hatten einen GNU-Hacker, Christian Grothoff, zu Gast, dessen Vortrag sich mit GNU-Taler befasste.
Insgesamt hatte das Treffen zehn Teilnehmer und eine "Frauenquote" von dreißig Prozent. Auch konnten wir neue Teilnehmer begrüßen.
Zunächst gab es daher die inzwischen obligate Vorstellungsrunde.
Bevor er zum Hauptthema des Abends kam, stellte uns Christian noch kurz die die Design-Prinzipien seines anderen Projekte GNUnet vor.
GNU-Taler ist keine weitere "Crypto-Währung", sondern ein Bezahlsystem. Bezahlt wird in herkömmlichen Währungen. Es kann aber auch für andere Währungen, beispielsweise sogenannte Regionalwährungen verwandt werden. Hier spielt insbesondere die Fälschungssicherheit dieses Systems eine besondere Rolle, die bei "Papiergeld" von Regionalwährungen oft nur unzureichend ist. Auch kann GNU-Taler nicht nur Bonsysteme u.ä. ersetzen, sondern auch jegliches Bargeld einer staatlichen Währung.
"Taler" ist Akronym und steht für "Taxable, Anonymous, Libre, Practical, Resource Friendly", was Christian uns dann im Einzelnen bei der darstellung des Systems erläuterte. Dabei zeigte er die Vorzüge dieses Bezahlsystems für Verbraucher, Unternehmer und den Staat auf.
Es gibt auch schon eine Demoversion für dieses Bezahlsystem, anhand derer uns Christian die praktische Handhabung des Bezahlsystems vorführen konnte.
Abgerundet wurde der Vortrag mit Vorschlägen, wie man dieses Projekt unterstützen kann.
Insgesamt ein sehr interessanter Vortrag, der im Verlaufe desselben und danach zu lebhaften Diskussionen Anlass gab.
Christian hat die Folien zum Vortrag (in englischer Sprache) mit dem Link zur Demoversion veröffentlicht:
http://grothoff.org/christian/fsfe2016.pdf
Es gibt auch ein Paper von ihm für diejenigen, die an der Kryptografie interessiert sind:
http://grothoff.org/christian/taler-draft.pdf
Das nächste reguläre Treffen findet am 31.08.2016 ab 19:30 Uhr im Chaosdorf, Hüttenstr. 25, 40215 Düsseldorf, https://chaosdorf.de/kontakt/ statt.
Der offizielle Teil des Treffens beginnt um 20:00 Uhr. Wer später kommt, verpasst also etwas.
Wir werden einen wohl einen Vortrag zum Hardware-Software-Codesign präsentiert bekommen. Dies ist eines der wichtigsten Gebiete für den Entwurf eingebetteter Systeme. Es geht dabei um den verzahnten computergestützten Entwurf von digitaler Hardware und Software.
Gruß Michael
Hallo Michael,
Vielen Dank für den ausführlichen Bericht!
Das nächste reguläre Treffen findet am 31.08.2016 ab 19:30 Uhr im Chaosdorf, Hüttenstr. 25, 40215 Düsseldorf, https://chaosdorf.de/kontakt/ statt.
Ich trage das wieder unter Termine ein.
Der offizielle Teil des Treffens beginnt um 20:00 Uhr. Wer später kommt, verpasst also etwas.
Wir werden einen wohl einen Vortrag zum Hardware-Software-Codesign präsentiert bekommen. Dies ist eines der wichtigsten Gebiete für den Entwurf eingebetteter Systeme. Es geht dabei um den verzahnten computergestützten Entwurf von digitaler Hardware und Software.
WIrd es auch darum geben, wie man durch das Software-Design dafür sorgen kann, daß im Betrieb der Software möglichst wenig Ressourcen benötigt werden?
Gruß
Wolfgang