Hallo zusammen,
am 10. März 2011 wird die FSFE 10 Jahre alt. Wir wollen das mit euch feiern. Dazu wollen wir von euch Ideen hören, wie wir gemeinsam feiern könnten.
Ein paar verrückte "Gehirnstürme":
- Eine Webseite auf der Unterstützer ihr Bild hochladen können. Daraus generieren wir ein großes Poster auf dem die Bilder das Fellowship Logo bilden. Das können wir später auch gut für Messestände verwenden. - Ein IRC Treffen bei dem wir vorher ein Teilnehmerziel festlegen und dann schauen, wie viele Leute mit uns zusammen feiern. - Luftballons besorgen mit Helium füllen und von mehreren Stellen in Europa mit Nachrichten von Freien-Software-Unterstützern durch Europa fliegen lassen.
Daneben werden wir Hintergrund-Matrial für unsere Webseite zusammenstellen. Das kann ein paar nette Zitate von Leute beinhalten, die schon länger mit uns zu tun haben, ein paar gute Geschichten, alte Bilder und "Geschichtsmatrial" wie http://www.fsfe.org/about/history/doi.en.html und http://www.fsfe.org/about/history/preamble.en.html.
So die Frage an euch: Wer sollte ein Zitat beisteuern? Wer kennt gute Geschichten zur FSFE? Wer hat noch gute Bilder?
Ich freue mich auf eure Ideen. Diese müssen noch nicht perfekt sein und können sich ruhig erst mal etwas verrückt anhören.
Viele Grüße Matthias
Hi euch allen,
Matthias Kirschner wrote:
Hallo zusammen,
am 10. März 2011 wird die FSFE 10 Jahre alt. Wir wollen das mit euch feiern. Dazu wollen wir von euch Ideen hören, wie wir gemeinsam feiern könnten.
Ein paar verrückte "Gehirnstürme":
- Eine Webseite auf der Unterstützer ihr Bild hochladen können. Daraus generieren wir ein großes Poster auf dem die Bilder das Fellowship Logo bilden. Das können wir später auch gut für Messestände verwenden.
Finde ich eine wirklich schöne Idee, die zeigt, daß echte Menschen hinter der Idee und der FSFE stehen und es nach außen auch zeigen möchten.
- Luftballons besorgen mit Helium füllen und von mehreren Stellen in Europa mit Nachrichten von Freien-Software-Unterstützern durch Europa fliegen lassen.
Da mach ich sofort mit - Luftballons sind toll! Schön wäre natürlich, wenn der kleine Flyer am Ballon nicht nur das FSFE-Logo sowie Namen und Nachrichten des "Absenders" beinhalten würde, sondern die Nachricht in Englisch und seiner Landessprache wäre und erklären würde, aus welchem Land der Ballon kommt. Oder wie wäre es mit einer Möglichkeit zur Antwort?
Viele Grüße Julia
Hallo Julia,
* Julia Klein juliaklein@netzkontrast.com [2010-10-29 00:53:14 +0200]:
- Luftballons besorgen mit Helium füllen und von mehreren Stellen in Europa mit Nachrichten von Freien-Software-Unterstützern durch Europa fliegen lassen.
Da mach ich sofort mit - Luftballons sind toll! Schön wäre natürlich, wenn der kleine Flyer am Ballon nicht nur das FSFE-Logo sowie Namen und Nachrichten des "Absenders" beinhalten würde, sondern die Nachricht in Englisch und seiner Landessprache wäre und erklären würde, aus welchem Land der Ballon kommt. Oder wie wäre es mit einer Möglichkeit zur Antwort?
So als Postkarte, die man zurückschicken kann, damit wir nachher sehen wie weit sie geflogen sind :) Das ist eine gute Idee.
Viele Grüße Matthias
Hallo Julia, hallo Matthias,
Am Donnerstag, 4. November 2010, 11:44:53 schrieb Matthias Kirschner:
So als Postkarte, die man zurückschicken kann, damit wir nachher sehen wie weit sie geflogen sind :) Das ist eine gute Idee.
ja, die Idee finde ich auch sehr gut.
Vielleicht könnte man die Postkarte ja mit einer kurzen Info über Freie Software und die FSFE sowie einem Link zu einem ausführlicheren Grundsatztext wie z.B.
https://fsfe.org/projects/wsis/fs.de.html
oder auch dem Buch von Kelty
oder dem von Grassmuck
versehen?
Schöne Grüße micu
Hallo Zusammen,
Am 27.10.2010 13:36, schrieb Matthias Kirschner:
Hallo zusammen,
am 10. März 2011 wird die FSFE 10 Jahre alt. Wir wollen das mit euch feiern. Dazu wollen wir von euch Ideen hören, wie wir gemeinsam feiern könnten.
Ein paar verrückte "Gehirnstürme":
- Eine Webseite auf der Unterstützer ihr Bild hochladen können. Daraus generieren wir ein großes Poster auf dem die Bilder das Fellowship Logo bilden. Das können wir später auch gut für Messestände verwenden.
- Ein IRC Treffen bei dem wir vorher ein Teilnehmerziel festlegen und dann schauen, wie viele Leute mit uns zusammen feiern.
- Luftballons besorgen mit Helium füllen und von mehreren Stellen in Europa mit Nachrichten von Freien-Software-Unterstützern durch Europa fliegen lassen.
Finde ich alles gute Ideen.
Daneben werden wir Hintergrund-Matrial für unsere Webseite zusammenstellen. Das kann ein paar nette Zitate von Leute beinhalten, die schon länger mit uns zu tun haben, ein paar gute Geschichten, alte Bilder und "Geschichtsmatrial" wie http://www.fsfe.org/about/history/doi.en.html und http://www.fsfe.org/about/history/preamble.en.html.
So die Frage an euch: Wer sollte ein Zitat beisteuern? Wer kennt gute Geschichten zur FSFE? Wer hat noch gute Bilder?
Ich freue mich auf eure Ideen. Diese müssen noch nicht perfekt sein und können sich ruhig erst mal etwas verrückt anhören.
Wie wärs außerdem mit - einer Geburtstagsanzeige z.B. im Linuxmagazin o.ä. - oder Geburtstagskeksen mit FSFE Logo
Gruß Sascha
* Sascha Girrulat sascha@girrulat.de [2010-10-29 09:42:26 +0200]:
- Eine Webseite auf der Unterstützer ihr Bild hochladen können. Daraus generieren wir ein großes Poster auf dem die Bilder das Fellowship Logo bilden. Das können wir später auch gut für Messestände verwenden.
- Ein IRC Treffen bei dem wir vorher ein Teilnehmerziel festlegen und dann schauen, wie viele Leute mit uns zusammen feiern.
- Luftballons besorgen mit Helium füllen und von mehreren Stellen in Europa mit Nachrichten von Freien-Software-Unterstützern durch Europa fliegen lassen.
Finde ich alles gute Ideen.
Ok.
Ich freue mich auf eure Ideen. Diese müssen noch nicht perfekt sein und können sich ruhig erst mal etwas verrückt anhören.
Wie wärs außerdem mit
- einer Geburtstagsanzeige z.B. im Linuxmagazin o.ä.
Besondere Ideen dafür? Eine Anzeige von uns für unseren eigenen Geburtstag? Oder wie hast du dir das vorgestellt?
- oder Geburtstagskeksen mit FSFE Logo
Kekse sind immer gut. Wie würdest du die unter die Leute bringen? Bzw. was hast du genau mit den Keksen vor?
Viele Grüße Matthias
Hallo Matthias,
Am Mittwoch, 27. Oktober 2010, 13:36:43 schrieb Matthias Kirschner:
Ich freue mich auf eure Ideen. Diese müssen noch nicht perfekt sein und können sich ruhig erst mal etwas verrückt anhören.
als ich gestern mit dem Barcodescanner auf dem N900 herumgespielt habe, kam mir die Idee: Man könnte Sticker mit einem 2D-Barcode drucken, in dem eine kleine Nachricht wie "Die FSFE wird 10! Be smart --- use free software! http://fsfe.org" steht. Diese Sticker könnte man dann verteilen und überall in den Städten verkleben. Gäbe sicherlich auch einige verspielte, aber gedankenlose iPhone-Junkies, die sich mal anschauen, was denn in diesem Code steht. Alternativ könnte man die Codes auch mit auf die Postkarten drucken.
Man könnte außerdem ein 3D-Logo der FSFE / das Felloship-Logo im Stile von "Das magische Auge" erzeugen und z.B. mit auf die Postkarten drucken. Das habe ich schon mal gemacht und geht relativ einfach. Dafür gibt es eine freie Software für Windows, die mit wine sehr gut unter (freien) unixoiden Betriebssystemen läuft. Müsste ich nochmal recherchieren, wie die hieß, wenn Interesse besteht.
Noch eine Idee: Man könnte einige Sticks mit Informationen über freie Software und den FSFE-Geburtstag befüllen und als digitale Astlöcher http://www.netzpolitik.org/2010/offline-filesharing-digitale-astlocher- mit-usb-und-wlan/ anbringen. Oder man erstellt solche Mini-CDs mit Informationen über freie Software und den FSFE-Geburtstag und kann die dann an Ständen, an Freunde und Bekannte etc. verteilen und z.B. als Geocaches hinterlassen.
Ääähm ja, du sagtest, die Ideen dürfen verrückt sein ;).
Grüße micu
Hallo,
On Fri, Nov 05, 2010 at 01:30:20PM +0100, micu wrote:
als ich gestern mit dem Barcodescanner auf dem N900 herumgespielt habe, kam mir die Idee: Man könnte Sticker mit einem 2D-Barcode drucken, in dem eine kleine Nachricht wie "Die FSFE wird 10! Be smart --- use free software! http://fsfe.org" steht. Diese Sticker könnte man dann verteilen und überall in den Städten verkleben. Gäbe sicherlich auch einige verspielte, aber gedankenlose iPhone-Junkies, die sich mal anschauen, was denn in diesem Code steht.
Super Idee -- bin sicher dass da so Einige darauf anspringen :-)
-antrik-
Am 2010-11-05 20:06, schrieb olafBuddenhagen@gmx.net:
Hallo,
On Fri, Nov 05, 2010 at 01:30:20PM +0100, micu wrote:
als ich gestern mit dem Barcodescanner auf dem N900 herumgespielt habe, kam mir die Idee: Man könnte Sticker mit einem 2D-Barcode drucken, in dem eine kleine Nachricht wie "Die FSFE wird 10! Be smart --- use free software! http://fsfe.org" steht. Diese Sticker könnte man dann verteilen und überall in den Städten verkleben. Gäbe sicherlich auch einige verspielte, aber gedankenlose iPhone-Junkies, die sich mal anschauen, was denn in diesem Code steht.
Super Idee -- bin sicher dass da so Einige darauf anspringen :-)
Klingt interessant. Hab ein bischen gesucht und bin etwas verunsichert, weil es 1) für mich unerwartet viele 2d barcode varianten gibt und 2) doch einige mit patenten bzw lizenzen belegt sind.
Was würde sich da als technisch und rechtlich (freie norm) saubere lösung anbieten, die auch eine nennenswerte verbreitung hat? Erkannt werden von den barcode-leser wahrscheinlich mehrere (alle?) varianten.
Quellen: [http://en.wikipedia.org/wiki/Barcode#Matrix_.282D.29_barcodes] [http://de.wikipedia.org/wiki/2D-Code]
lg gerhard
gerhard.oettl@ogersoft.at gerhard.oettl@ogersoft.at schrieb:
Am 2010-11-05 20:06, schrieb olafBuddenhagen@gmx.net:
On Fri, Nov 05, 2010 at 01:30:20PM +0100, micu wrote:
als ich gestern mit dem Barcodescanner auf dem N900 herumgespielt habe, kam mir die Idee: Man könnte Sticker mit einem 2D-Barcode drucken, in dem eine kleine Nachricht wie "Die FSFE wird 10! Be smart --- use free software! http://fsfe.org" steht. Diese Sticker könnte man dann verteilen und überall in den Städten verkleben. Gäbe sicherlich auch einige verspielte, aber gedankenlose iPhone-Junkies, die sich mal anschauen, was denn in diesem Code steht.
Super Idee -- bin sicher dass da so Einige darauf anspringen :-)
Klingt interessant. Hab ein bischen gesucht und bin etwas verunsichert, weil es
- für mich unerwartet viele 2d barcode varianten gibt und 2) doch einige mit
patenten bzw lizenzen belegt sind.
Was würde sich da als technisch und rechtlich (freie norm) saubere lösung anbieten, die auch eine nennenswerte verbreitung hat?
Warum nicht einfach einen "1D"-Barcode? Der ist doch auch viel einfacher zu scannen.
Wir müssten vielleicht nur den Text etwas kürzen. Zum Beispiel ist "Die FSFE wird 10" keine nützliche Botschaft für Außen- stehende (die wir ja damit erreichen wollen) - das genügt, wenn die das auf der Homepage dann sehen. Daher mein Vorschlag:
Be smart - use free software! http://fsfe.org/
Eventuell könnte man das mit dem Stereogramm mit dem Barcode kombinieren, also den Barcode zum Beispiel an den unteren Rand des Stereogramm-Bildes hinzufügen. ;-)
Gruß Volker
* Volker Grabsch vog@notjusthosting.com [2010-11-24 12:09:04 +0100]:
Be smart - use free software! http://fsfe.org/
Ist mal notiert. Matthias
Hallo,
On Wed, Nov 24, 2010 at 12:09:04PM +0100, Volker Grabsch wrote:
gerhard.oettl@ogersoft.at gerhard.oettl@ogersoft.at schrieb:
On Fri, Nov 05, 2010 at 01:30:20PM +0100, micu wrote:
Man könnte Sticker mit einem 2D-Barcode drucken, in dem eine kleine Nachricht wie "Die FSFE wird 10! Be smart --- use free software! http://fsfe.org" steht. Diese Sticker könnte man dann verteilen und überall in den Städten verkleben. Gäbe sicherlich auch einige verspielte, aber gedankenlose iPhone-Junkies, die sich mal anschauen, was denn in diesem Code steht.
[...]
Klingt interessant. Hab ein bischen gesucht und bin etwas verunsichert, weil es 1) für mich unerwartet viele 2d barcode varianten gibt und 2) doch einige mit patenten bzw lizenzen belegt sind.
Was würde sich da als technisch und rechtlich (freie norm) saubere lösung anbieten, die auch eine nennenswerte verbreitung hat?
Warum nicht einfach einen "1D"-Barcode?
Gibt's überhaupt 'nen Standard für Textnachrichten in 1D-Barcodes?
Der ist doch auch viel einfacher zu scannen.
Das ist völlig irrelevant -- für jedes Smartphone gibt's Apps zum auswerten von QR-Codes; bei 1D-Barcodes habe ich da eher Zweifel...
-antrik-
Am 2010-11-23 21:44, schrieb gerhard.oettl@ogersoft.at:
Am 2010-11-05 20:06, schrieb olafBuddenhagen@gmx.net:
Hallo,
On Fri, Nov 05, 2010 at 01:30:20PM +0100, micu wrote:
Man könnte Sticker mit einem 2D-Barcode drucken, in dem eine kleine Nachricht steht wie. Die FSFE wird 10! Be smart --- use free software! http://fsfe.org"
Super Idee -- bin sicher dass da so Einige darauf anspringen :-)
Klingt interessant. Hab ein bischen gesucht und bin etwas verunsichert, weil es
- für mich unerwartet viele 2d barcode varianten gibt und 2) doch einige mit
patenten bzw lizenzen belegt sind.
Nach einigem stöbern reduziert sich die verwirrung. Meiner meinung nach in frage kommen eh nur DataMatrix und QR (quick response) code.
Ich denke der vorgeschlagene text ist schon ok und der aufwand das überall mitzudrucken, wo ohnehin was aufgedruckt wird hält sich in grenzen. Mein smartphone (htc) hat ab 2x2 cm alles zuverlässig erkannt. Darunter kaum - kann aber an meinem gerät liegen, habe das erstmal mit barcode experimentiert.
lg gerhard
Hi Micu,
* micu micuintus@gmx.de [2010-11-05 13:30:20 +0100]:
als ich gestern mit dem Barcodescanner auf dem N900 herumgespielt habe, kam mir die Idee: Man könnte Sticker mit einem 2D-Barcode drucken, in dem eine kleine Nachricht wie "Die FSFE wird 10! Be smart --- use free software! http://fsfe.org" steht. Diese Sticker könnte man dann verteilen und überall in den Städten verkleben. Gäbe sicherlich auch einige verspielte, aber gedankenlose iPhone-Junkies, die sich mal anschauen, was denn in diesem Code steht. Alternativ könnte man die Codes auch mit auf die Postkarten drucken.
Das hört sich gut an :)
Man könnte außerdem ein 3D-Logo der FSFE / das Felloship-Logo im Stile von "Das magische Auge" erzeugen und z.B. mit auf die Postkarten drucken. Das habe ich schon mal gemacht und geht relativ einfach. Dafür gibt es eine freie Software für Windows, die mit wine sehr gut unter (freien) unixoiden Betriebssystemen läuft. Müsste ich nochmal recherchieren, wie die hieß, wenn Interesse besteht.
Kannst du mir mal ein paar Details dazu schicken? Wieviel kosten solche Karten? Wenn du sowas machen könntest, wäre das natürlich sehr gut!
Noch eine Idee: Man könnte einige Sticks mit Informationen über freie Software und den FSFE-Geburtstag befüllen und als digitale Astlöcher http://www.netzpolitik.org/2010/offline-filesharing-digitale-astlocher- mit-usb-und-wlan/ anbringen. Oder man erstellt solche Mini-CDs mit Informationen über freie Software und den FSFE-Geburtstag und kann die dann an Ständen, an Freunde und Bekannte etc. verteilen und z.B. als Geocaches hinterlassen.
Auch super. Werde das alles auf die Liste packen. Ich höre etwas raus, dass du Lust hättest dabei mitzuhelfen. Ist das richtig?
Viele Grüße Matthias
Matthias Kirschner mk@fsfe.org schrieb:
- micu micuintus@gmx.de [2010-11-05 13:30:20 +0100]:
Man könnte außerdem ein 3D-Logo der FSFE / das Felloship-Logo im Stile von "Das magische Auge" erzeugen und z.B. mit auf die Postkarten drucken. Das habe ich schon mal gemacht und geht relativ einfach. Dafür gibt es eine freie Software für Windows, die mit wine sehr gut unter (freien) unixoiden Betriebssystemen läuft. Müsste ich nochmal recherchieren, wie die hieß, wenn Interesse besteht.
Kannst du mir mal ein paar Details dazu schicken? Wieviel kosten solche Karten? Wenn du sowas machen könntest, wäre das natürlich sehr gut!
Nur zur Info: Es gibt auch _wirklich_ freie Software, die das kann. Ich habe unter Linux schon vor Jahren damit herumgespielt.
Ich weiß nicht, welches das beste ist, aber "stereograph" ist zum Beispiel ein solches Programm.
Viele Grüße Volker
Volker Grabsch vog@notjusthosting.com schrieb:
Matthias Kirschner mk@fsfe.org schrieb:
- micu micuintus@gmx.de [2010-11-05 13:30:20 +0100]:
Man könnte außerdem ein 3D-Logo der FSFE / das Felloship-Logo im Stile von "Das magische Auge" erzeugen und z.B. mit auf die Postkarten drucken. Das habe ich schon mal gemacht und geht relativ einfach. Dafür gibt es eine freie Software für Windows,
[...]
Nur zur Info: Es gibt auch _wirklich_ freie Software, die das kann. Ich habe unter Linux schon vor Jahren damit herumgespielt.
Okay, ich habe mal ein Beispiel-Stereographisches Bild erzeugt.
Anbei sende ich euch das Basis-SVG, welches die Höheninformation in Form von Graustufen enthält. Es ist eine Modifikation des Original-FSFE-Logos.
Dieses habe ich als PNG gerastert und dann durch "stereograph" gejagt:
inkscape -e stereograph-fsfe-logo.png -w 1024 stereograph-fsfe-logo.svg
stereograph -A -b stereograph-fsfe-logo.png -w 100 -f png > 3d-fsfe-logo.png
Das Ergebnis liegt ebenfalls im Anhang. Es enthält am oberen Rand zwei Hilfsdreiecke, damit man die richtige Augeneinstellung leichter findet.
Die Kaltduscher unter uns können bei "stereograph" die Option "-A" weglassen, dann gibt es keine Hilfsdreiecke mehr.
Weitere Ideen und Verbesserungsvorschläge sind herzlich willkommen. Um den Postkartendruck müsste sich aber jemand anderes kümmern. :-)
Gruß Volker
Volker Grabsch vog@notjusthosting.com schrieb:
Es ist eine Modifikation des Original-FSFE-Logos.
[...]
stereograph -A -b stereograph-fsfe-logo.png -w 100 -f png > 3d-fsfe-logo.png
Das Ergebnis liegt ebenfalls im Anhang. Es enthält am oberen Rand zwei Hilfsdreiecke, damit man die richtige Augeneinstellung leichter findet.
Nachtrag: Sorry für das 400kb-Attachment. Das PNG war nicht optimal komprimiert.
Gruß Volker
On Tuesday 23 November 2010 20:44:24 Volker Grabsch wrote:
Das Ergebnis liegt ebenfalls im Anhang. Es enthält am oberen Rand zwei Hilfsdreiecke, damit man die richtige Augeneinstellung leichter findet.
Soll das PNG nur buntes Rauschen enthalten?
lg, Torsten
Nein, es enthält ein "dreidimensionales" stereographisches bild. Das erfordert allerdings etwas erfahrung mit der "richtigen augenhaltung". Am anfang sieht man meist nichts. Bei meinem ersten stereographischen buch habe ich etliche tage gebraucht um den dreh heraus zu haben. Anderen fällt es leichter ...
Als geübter würde ich sagen: Danke volker - gute arbeit!
lg gerhard
Am 2010-11-23 21:03, schrieb Torsten Grote:
On Tuesday 23 November 2010 20:44:24 Volker Grabsch wrote:
Das Ergebnis liegt ebenfalls im Anhang. Es enthält am oberen Rand zwei Hilfsdreiecke, damit man die richtige Augeneinstellung leichter findet.
Soll das PNG nur buntes Rauschen enthalten?
lg, Torsten
fsfe-de mailing list fsfe-de@fsfeurope.org https://mail.fsfeurope.org/mailman/listinfo/fsfe-de
Torsten Grote Torsten.Grote@fsfe.org schrieb:
On Tuesday 23 November 2010 20:44:24 Volker Grabsch wrote:
Das Ergebnis liegt ebenfalls im Anhang. Es enthält am oberen Rand zwei Hilfsdreiecke, damit man die richtige Augeneinstellung leichter findet.
Soll das PNG nur buntes Rauschen enthalten?
Hehe ... das ist ein Autostereogramm mit Zufallstextur. Siehe auch:
http://en.wikipedia.org/wiki/Autostereogram
Ich könnte auch eine andere Textur hinterlegen, z.B. das Fellowship- Logo oder so. Aber ich dachte, mit Zufallstextur wirkt es geheimnis- voller.
Deshalb auch die Hilfsdreiecke am oberen Rand, dass man trotzdem die richtige Augeneinstellung findet. Allerdings findet man die mit etwas Übungs auch ohne Hilfsdreiecke.
Gruß Volker
Volker Grabsch vog@notjusthosting.com [23.11.2010 21:28]:
Ich könnte auch eine andere Textur hinterlegen, z.B. das Fellowship- Logo oder so. Aber ich dachte, mit Zufallstextur wirkt es geheimnis- voller.
kewl! Geht das auch in bunt? Dann würde sich das Logo besser vom Hintergrund abheben, nachdem die Augen 'eingerastet' sind.
kind regards
Thomas Jensch
On Wednesday 24 November 2010 00:13:25 Thomas Jensch wrote:
kewl! Geht das auch in bunt? Dann würde sich das Logo besser vom Hintergrund abheben, nachdem die Augen 'eingerastet' sind.
Gibt es dafuer eine Anleitung? Ich versage immer noch klaeglich... Als Kind konnte ich das mal, wenn ich mich richtig erinnere.
Torsten
Torsten Grote Torsten.Grote@fsfe.org schrieb:
On Wednesday 24 November 2010 00:13:25 Thomas Jensch wrote:
kewl! Geht das auch in bunt? Dann würde sich das Logo besser vom Hintergrund abheben, nachdem die Augen 'eingerastet' sind.
Gibt es dafuer eine Anleitung? Ich versage immer noch klaeglich... Als Kind konnte ich das mal, wenn ich mich richtig erinnere.
Vielleicht hilft der entsprechende Abschnitt in der Wikipedia weiter:
http://en.wikipedia.org/wiki/Autostereogram#Viewing_techniques
Ansonsten würde ich sagen, ist es am einfachsten, es sich von jemanden direkt zu zeigen und zu erklären lassen. Und dann üben, üben, üben. :-)
Gruß Volker
* Volker Grabsch vog@notjusthosting.com [2010-11-27 14:30:12 +0100]:
Ansonsten würde ich sagen, ist es am einfachsten, es sich von jemanden direkt zu zeigen und zu erklären lassen. Und dann üben, üben, üben. :-)
Erklär das doch bitte mal beim nächsten Berliner Fellowship-Treffen :)
Viele Grüße Matthias
Torsten Grote Torsten.Grote@fsfe.org [27.11.2010 14:04]:
Gibt es dafuer eine Anleitung? Ich versage immer noch klaeglich... Als Kind konnte ich das mal, wenn ich mich richtig erinnere.
Ich geh immer mit der Nase direkt an den Bildschirm und schaue in die Unendlichkeit (also nicht fokussiert auf das Bild, sondern eher durch). Dann beweg ich mich vom Monitor weg. Bei so ca. 30cm rastet dann der Blick auf das 3D-Motiv ein.
kind regards
Thomas Jensch
* Thomas Jensch riepernet@fsfe.org [2010-11-27 14:44:17 +0100]:
Ich geh immer mit der Nase direkt an den Bildschirm und schaue in die Unendlichkeit (also nicht fokussiert auf das Bild, sondern eher durch). Dann beweg ich mich vom Monitor weg. Bei so ca. 30cm rastet dann der Blick auf das 3D-Motiv ein.
Danke! Jetzt hab ich es geschaft :) Matthias
Thomas Jensch riepernet@fsfe.org schrieb:
Volker Grabsch vog@notjusthosting.com [23.11.2010 21:28]:
Ich könnte auch eine andere Textur hinterlegen, z.B. das Fellowship- Logo oder so. Aber ich dachte, mit Zufallstextur wirkt es geheimnis- voller.
kewl! Geht das auch in bunt? Dann würde sich das Logo besser vom Hintergrund abheben, nachdem die Augen 'eingerastet' sind.
Da der Hintergrund genauso bunt wie der Vordergrund wäre, glaube ich nicht, dass es eine Verbesserung bringen würde.
Eine Verbesserung würde man eher mit einer klaren Textur (nicht Zufallstextur) erreichen, egal ob schwarz-weiß oder farbig.
Habt ihr Vorschläge für solch eine Textur?
Gruß Volker
Hallo,
On Tue, Nov 23, 2010 at 09:28:43PM +0100, Volker Grabsch wrote:
Deshalb auch die Hilfsdreiecke am oberen Rand, dass man trotzdem die richtige Augeneinstellung findet. Allerdings findet man die mit etwas Übungs auch ohne Hilfsdreiecke.
Die haben mir nichts gebracht, jedoch sieht es echt beeindruckend aus, wenn das Gehirn das Muster erkennt. Gibt' sowas auch für Anaglyphdarstellung?
Viele Grüße Michael