Hoi Urs
Betreffend Briefinhalt wird ziemlich sicher sein, dass es 1 Parteisektionslogin gibt ( https://freedomvote.ch/party/bdp_ag/ mit Passwort) und 5 vorgefertigte Politikerlinks (z.B. https://freedomvote.ch/politician/2-DHD8N2p2BcCcUMF1Vp/edit/profile/ ) - die müsste man in den Serienbrief integrieren.
Wäre es irgendwie möglich, zumindest den Parteisektionslogin und evt. die ersten beiden Politikerlinks (der 5) auf die erste Seite zu bringen, damit es einen "glatten"/verständlichen Seitenumbruch erzeugt? Wie Elias gesagt hat, finde ich auch die Links zu gross ;)
PS: Das Abtippen spielt m.M.n in der Email keine Rolle (erst im Brief): Wenn wir das Mail als HTML verschicken, sollte doch jeder vernünftige Browser die URLs als Link darstellen (Spoiler: Ich arbeite nicht mit M$ Outlook) - ansonsten halt als Plaintext Mail?
Simon
2015-08-23 13:08 GMT+02:00 Simon Wächter waechter.simon@gmail.com:
Hoi Urs
Wir sind momentan gerade am Schauen, da
On 23.08.2015 11:03, Urs Fässler wrote:
Der Link muss dann ja fehlerfrei abgetippt werden. Daher finde ich den auch zu lang und kompliziert. Auch das beilegen eines QR-Codes hilft wahrscheinlich nicht viel, denn der müsste ja noch in den PC kommen.
Wäre für eine Lösung wie von Michel vorgeschlagen, also freedomvote.ch/{parteiCODE}{KantonsCODE} http://freedomvote.ch/%7BparteiCODE%7D%7BKantonsCODE%7D und zusätzlich ein individuelles Passwort.
Ist dies von Seiten freedomvote machbar?
Gruss Urs
Am Freitag, den 21.08.2015, 10:48 +0200 schrieb Michel:
Konstruktive kritik wäre vielleicht besser 😊
können wir nicht ein shortlink generieren, das den befehl enthält ein Profile zu erstellen? Wahlweise anhand zusätzlicher codes. gleich das Parteilogo und Sektionsinfos nachträgt. freedomvote.ch/{parteiCODE}{KantonsCODE} http://freedomvote.ch/%7BparteiCODE%7D%7BKantonsCODE%7D
Als zückerchen und falls sowas leicht umsetzbar ist, könnte man einen admin link mit senden, der es den Sektionen erlaubt Sektionslogo, Sektionswebseite, eine Beschreibun, und vielleicht und nur wenn unaufdringlich umsetzbar eine Werbebotschaft hinterlegt werden kann.freedomvote.ch/{parteiCODE}{adminCODE} http://freedomvote.ch/%7BparteiCODE%7D%7BadminCODE%7D
Das zückerchen könnte das Ganze noch attraktiver gestalten.
Gruss Michel
Am 20. August 2015 22:17:24 MESZ, schrieb "Urs Fässler" ufas@fsfe.org:
Und hier das Repository fuer den Serienbrief: https://freie.software/UrsFassler/LatexSerienbrief
Im Anhang findet ihr ein Beispiel. Ist noch etwas lang, oder was meint Ihr?
Grüsse Urs
Am Dienstag, den 18.08.2015, 08:06 +0200 schrieb Simon Wächter:
Hallo zusammen
Hier wäre noch der Link zum Anschreibbrief:
https://public.pad.fsfe.org/p/Freedomvote_Schreiben
Ich kläre gerade ab, ob wir die Parteilinks batchmässig in den Brief integrieren und so ein PDF (und für die Mails Plaintext/HTML) generieren können.
Gruss, Simon
Zurich mailing list Zurich@lists.fsfe.org https://lists.fsfe.org/mailman/listinfo/zurich
Zurich mailing listZurich@lists.fsfe.orghttps://lists.fsfe.org/mailman/listinfo/zurich
Zurich mailing listZurich@lists.fsfe.orghttps://lists.fsfe.org/mailman/listinfo/zurich
Zurich mailing listZurich@lists.fsfe.orghttps://lists.fsfe.org/mailman/listinfo/zurich
Hoi zaemme.
Betreffend Briefinhalt wird ziemlich sicher sein, dass es 1 Parteisektionslogin gibt ( https://freedomvote.ch/party/bdp_ag/ mit Passwort) und 5 vorgefertigte Politikerlinks (z.B. https://freedomvote.ch/politician/2-DHD8N2p2BcCcUMF1Vp/edit/profile/ ) - die müsste man in den Serienbrief integrieren.
Wäre es nicht eine Option, in den Brief nur den kurzen Parteilink zu schreiben und die langen Politikerlinks nur in der Mail aufzuführen? Dort spielt es ja nicht so eine grosse Rolle.
Viele Grüsse Marcus
Wäre es irgendwie möglich, zumindest den Parteisektionslogin und evt. die ersten beiden Politikerlinks (der 5) auf die erste Seite zu bringen, damit es einen "glatten"/verständlichen Seitenumbruch erzeugt? Wie Elias gesagt hat, finde ich auch die Links zu gross ;)
PS: Das Abtippen spielt m.M.n in der Email keine Rolle (erst im Brief): Wenn wir das Mail als HTML verschicken, sollte doch jeder vernünftige Browser die URLs als Link darstellen (Spoiler: Ich arbeite nicht mit M$ Outlook) - ansonsten halt als Plaintext Mail?
Simon
2015-08-23 13:08 GMT+02:00 Simon Wächter waechter.simon@gmail.com: Hoi Urs
Wir sind momentan gerade am Schauen, da
On 23.08.2015 11:03, Urs Fässler wrote:
Der Link muss dann ja fehlerfrei abgetippt werden. Daher finde ich den auch zu lang und kompliziert. Auch das beilegen eines QR-Codes hilft wahrscheinlich nicht viel, denn der müsste ja noch in den PC kommen.
Wäre für eine Lösung wie von Michel vorgeschlagen, also
freedomvote.ch/{parteiCODE}{KantonsCODE}
und zusätzlich ein individuelles Passwort.
Ist dies von Seiten freedomvote machbar?
Gruss Urs
Am Freitag, den 21.08.2015, 10:48 +0200 schrieb Michel:
Konstruktive kritik wäre vielleicht besser 😊
können wir nicht ein shortlink generieren, das den befehl enthält ein Profile zu erstellen? Wahlweise anhand zusätzlicher codes. gleich das Parteilogo und Sektionsinfos nachträgt.
freedomvote.ch/{parteiCODE}{KantonsCODE}
Als zückerchen und falls sowas leicht umsetzbar ist, könnte man einen admin link mit senden, der es den Sektionen erlaubt Sektionslogo, Sektionswebseite, eine Beschreibun, und vielleicht und nur wenn unaufdringlich umsetzbar eine Werbebotschaft hinterlegt werden kann.
freedomvote.ch/{parteiCODE}{adminCODE}
Das zückerchen könnte das Ganze noch attraktiver gestalten.
Gruss Michel
Am 20. August 2015 22:17:24 MESZ, schrieb "Urs Fässler" <
ufas@fsfe.org
:
Und hier das Repository fuer den Serienbrief:
https://freie.software/UrsFassler/LatexSerienbrief
Im Anhang findet ihr ein Beispiel. Ist noch etwas lang, oder was meint Ihr?
Grüsse Urs
Am Dienstag, den 18.08.2015, 08:06 +0200 schrieb Simon Wächter:
Hallo zusammen
Hier wäre noch der Link zum Anschreibbrief:
https://public.pad.fsfe.org/p/Freedomvote_Schreiben
Ich kläre gerade ab, ob wir die Parteilinks batchmässig in den Brief integrieren und so ein PDF (und für die Mails Plaintext/HTML) generieren können.
Gruss, Simon
Zurich mailing list
Zurich@lists.fsfe.org
Zurich mailing list
Zurich@lists.fsfe.org https://lists.fsfe.org/mailman/listinfo/zurich
Zurich mailing list
Zurich@lists.fsfe.org https://lists.fsfe.org/mailman/listinfo/zurich
Zurich mailing list
Zurich@lists.fsfe.org https://lists.fsfe.org/mailman/listinfo/zurich
Zurich mailing list Zurich@lists.fsfe.org https://lists.fsfe.org/mailman/listinfo/zurich
Hoi Marcus
Ja, das stellt meiner Meinung nach eine sehr gute Lösung dar. In der Mail spielt der Seitenumbrich keine Rolle, im Remiderbrief ist es dann aber trotzdem [designässig] schön gelöst.
@Urs: Ich schaue gerade, dass eine zweite CSV Daten mit Parteisektionen und deren 5 Politikerlinks generiert werden kann und ich dir die beiden aktuellen CSVs dann zukommenlassen kann.
Simon
2015-08-25 7:22 GMT+02:00 Marcus Möller marcus.moeller@gmx.ch:
Hoi zaemme.
Betreffend Briefinhalt wird ziemlich sicher sein, dass es 1
Parteisektionslogin gibt ( https://freedomvote.ch/party/bdp_ag/ mit Passwort) und 5 vorgefertigte Politikerlinks (z.B. https://freedomvote.ch/politician/2-DHD8N2p2BcCcUMF1Vp/edit/profile/ ) - die müsste man in den Serienbrief integrieren.
Wäre es nicht eine Option, in den Brief nur den kurzen Parteilink zu schreiben und die langen Politikerlinks nur in der Mail aufzuführen? Dort spielt es ja nicht so eine grosse Rolle.
Viele Grüsse Marcus
Wäre es irgendwie möglich, zumindest den Parteisektionslogin und evt.
die ersten beiden Politikerlinks (der 5) auf die erste Seite zu bringen, damit es einen "glatten"/verständlichen Seitenumbruch erzeugt? Wie Elias gesagt hat, finde ich auch die Links zu gross ;)
PS: Das Abtippen spielt m.M.n in der Email keine Rolle (erst im Brief):
Wenn wir das Mail als HTML verschicken, sollte doch jeder vernünftige Browser die URLs als Link darstellen (Spoiler: Ich arbeite nicht mit M$ Outlook) - ansonsten halt als Plaintext Mail?
Simon
2015-08-23 13:08 GMT+02:00 Simon Wächter waechter.simon@gmail.com: Hoi Urs
Wir sind momentan gerade am Schauen, da
On 23.08.2015 11:03, Urs Fässler wrote:
Der Link muss dann ja fehlerfrei abgetippt werden. Daher finde ich den auch zu lang und kompliziert. Auch das beilegen eines QR-Codes hilft wahrscheinlich nicht viel, denn der müsste ja noch in den PC kommen.
Wäre für eine Lösung wie von Michel vorgeschlagen, also
freedomvote.ch/{parteiCODE}{KantonsCODE}
und zusätzlich ein individuelles Passwort.
Ist dies von Seiten freedomvote machbar?
Gruss Urs
Am Freitag, den 21.08.2015, 10:48 +0200 schrieb Michel:
Konstruktive kritik wäre vielleicht besser 😊
können wir nicht ein shortlink generieren, das den befehl enthält ein Profile zu erstellen? Wahlweise anhand zusätzlicher codes. gleich das Parteilogo und Sektionsinfos nachträgt.
freedomvote.ch/{parteiCODE}{KantonsCODE}
Als zückerchen und falls sowas leicht umsetzbar ist, könnte man einen admin link mit senden, der es den Sektionen erlaubt Sektionslogo, Sektionswebseite, eine Beschreibun, und vielleicht und nur wenn unaufdringlich umsetzbar eine Werbebotschaft hinterlegt werden kann.
freedomvote.ch/{parteiCODE}{adminCODE}
Das zückerchen könnte das Ganze noch attraktiver gestalten.
Gruss Michel
Am 20. August 2015 22:17:24 MESZ, schrieb "Urs Fässler" <
ufas@fsfe.org
:
Und hier das Repository fuer den Serienbrief:
https://freie.software/UrsFassler/LatexSerienbrief
Im Anhang findet ihr ein Beispiel. Ist noch etwas lang, oder was meint Ihr?
Grüsse Urs
Am Dienstag, den 18.08.2015, 08:06 +0200 schrieb Simon Wächter:
Hallo zusammen
Hier wäre noch der Link zum Anschreibbrief:
https://public.pad.fsfe.org/p/Freedomvote_Schreiben
Ich kläre gerade ab, ob wir die Parteilinks batchmässig in den Brief integrieren und so ein PDF (und für die Mails Plaintext/HTML) generieren können.
Gruss, Simon
Zurich mailing list
Zurich@lists.fsfe.org
Zurich mailing list
Zurich@lists.fsfe.org https://lists.fsfe.org/mailman/listinfo/zurich
Zurich mailing list
Zurich@lists.fsfe.org https://lists.fsfe.org/mailman/listinfo/zurich
Zurich mailing list
Zurich@lists.fsfe.org https://lists.fsfe.org/mailman/listinfo/zurich
Zurich mailing list Zurich@lists.fsfe.org https://lists.fsfe.org/mailman/listinfo/zurich
Zurich mailing list Zurich@lists.fsfe.org https://lists.fsfe.org/mailman/listinfo/zurich
Hoi zaemme,
Ja, das stellt meiner Meinung nach eine sehr gute Lösung dar. In der Mail spielt der Seitenumbrich keine Rolle, im Remiderbrief ist es dann aber trotzdem [designässig] schön gelöst.
Super.
@Urs: Ich schaue gerade, dass eine zweite CSV Daten mit Parteisektionen und deren 5 Politikerlinks generiert werden kann und ich dir die beiden aktuellen CSVs dann zukommenlassen kann.
Ok, schickt mir dann bitte einfach die generierten PDF Dateien zum Drucken. Den Rest könnt ihr gut auch im GIT ablegen. Das fsfe/freedomvote GIT ist nicht public und nur wir haben dort Zugriff.
Liebe Grüsse Marcus
Simon
2015-08-25 7:22 GMT+02:00 Marcus Möller marcus.moeller@gmx.ch: Hoi zaemme.
Betreffend Briefinhalt wird ziemlich sicher sein, dass es 1 Parteisektionslogin gibt ( https://freedomvote.ch/party/bdp_ag/ mit Passwort) und 5 vorgefertigte Politikerlinks (z.B. https://freedomvote.ch/politician/2-DHD8N2p2BcCcUMF1Vp/edit/profile/ ) - die müsste man in den Serienbrief integrieren.
Wäre es nicht eine Option, in den Brief nur den kurzen Parteilink zu schreiben und die langen Politikerlinks nur in der Mail aufzuführen? Dort spielt es ja nicht so eine grosse Rolle.
Viele Grüsse Marcus
Wäre es irgendwie möglich, zumindest den Parteisektionslogin und evt. die ersten beiden Politikerlinks (der 5) auf die erste Seite zu bringen, damit es einen "glatten"/verständlichen Seitenumbruch erzeugt? Wie Elias gesagt hat, finde ich auch die Links zu gross ;)
PS: Das Abtippen spielt m.M.n in der Email keine Rolle (erst im Brief): Wenn wir das Mail als HTML verschicken, sollte doch jeder vernünftige Browser die URLs als Link darstellen (Spoiler: Ich arbeite nicht mit M$ Outlook) - ansonsten halt als Plaintext Mail?
Simon
2015-08-23 13:08 GMT+02:00 Simon Wächter waechter.simon@gmail.com: Hoi Urs
Wir sind momentan gerade am Schauen, da
On 23.08.2015 11:03, Urs Fässler wrote:
Der Link muss dann ja fehlerfrei abgetippt werden. Daher finde ich den auch zu lang und kompliziert. Auch das beilegen eines QR-Codes hilft wahrscheinlich nicht viel, denn der müsste ja noch in den PC kommen.
Wäre für eine Lösung wie von Michel vorgeschlagen, also
freedomvote.ch/{parteiCODE}{KantonsCODE}
und zusätzlich ein individuelles Passwort.
Ist dies von Seiten freedomvote machbar?
Gruss Urs
Am Freitag, den 21.08.2015, 10:48 +0200 schrieb Michel:
Konstruktive kritik wäre vielleicht besser 😊
können wir nicht ein shortlink generieren, das den befehl enthält ein Profile zu erstellen? Wahlweise anhand zusätzlicher codes. gleich das Parteilogo und Sektionsinfos nachträgt.
freedomvote.ch/{parteiCODE}{KantonsCODE}
Als zückerchen und falls sowas leicht umsetzbar ist, könnte man einen admin link mit senden, der es den Sektionen erlaubt Sektionslogo, Sektionswebseite, eine Beschreibun, und vielleicht und nur wenn unaufdringlich umsetzbar eine Werbebotschaft hinterlegt werden kann.
freedomvote.ch/{parteiCODE}{adminCODE}
Das zückerchen könnte das Ganze noch attraktiver gestalten.
Gruss Michel
Am 20. August 2015 22:17:24 MESZ, schrieb "Urs Fässler" <
ufas@fsfe.org
:
Und hier das Repository fuer den Serienbrief:
https://freie.software/UrsFassler/LatexSerienbrief
Im Anhang findet ihr ein Beispiel. Ist noch etwas lang, oder was meint Ihr?
Grüsse Urs
Am Dienstag, den 18.08.2015, 08:06 +0200 schrieb Simon Wächter:
Hallo zusammen
Hier wäre noch der Link zum Anschreibbrief:
https://public.pad.fsfe.org/p/Freedomvote_Schreiben
Ich kläre gerade ab, ob wir die Parteilinks batchmässig in den Brief integrieren und so ein PDF (und für die Mails Plaintext/HTML) generieren können.
Gruss, Simon
Zurich mailing list
Zurich@lists.fsfe.org
Zurich mailing list
Zurich@lists.fsfe.org https://lists.fsfe.org/mailman/listinfo/zurich
Zurich mailing list
Zurich@lists.fsfe.org https://lists.fsfe.org/mailman/listinfo/zurich
Zurich mailing list
Zurich@lists.fsfe.org https://lists.fsfe.org/mailman/listinfo/zurich
Zurich mailing list Zurich@lists.fsfe.org https://lists.fsfe.org/mailman/listinfo/zurich
Zurich mailing list Zurich@lists.fsfe.org https://lists.fsfe.org/mailman/listinfo/zurich
Zurich mailing list Zurich@lists.fsfe.org https://lists.fsfe.org/mailman/listinfo/zurich